Chernovol M. I., Kulieshkov Ju. V.
Pages: 53-59.

Full article: 

---

Abstract

The purpose. To detect effect which originates during optimization of parameters of toothing of gear pump (GP). Methods. Theoretical-experimental methods of probe. On the basis of the developed mathematical model of process of feed of GP the design procedure is offered of optimum parameters of toothing, where parameter of optimization is the coefficient of use of volume of wreaths of sprockets. Results. During adaptation (to production conditions) of the construction of experimental pump with the augmented specific working volume they determined an opportunity of decreasing width of a cone at saving working volume of pump matching standard norms. It made it possible to reduce load on bearings of pump which primarily were responsible for reliability of the pump. New dependence is offered for account of load on bearings of pump, which in many aspects is determined by coefficient of overlapping of toothing. During designing the gear pump with optimum parameters and adaptation its operation parameters to standard norms they found synergetic effect, namely: decrease of overall dimensions and mass of the designed pump. Conclusions. The developed design procedure of parameters of toothing of rocking node of gear pump made it possible to design construction of GP with augmented specific working volume and feed. Thus coefficient of use of volume of wreaths of sprockets of the experimental pump grew up to 0,3323, that on 11% was more than at serial pump, and working volume of pump reached 36,33 cm3, that on 14,6% was more than at serial pump. It stipulated synergetic effect which was implemented in lowering overall dimensions and mass of the designed pump.

---

Key words: gear pump, hydraulic fluid, toothing, working volume of pump, specific working volume of pump, synergetic effect.

---

References

1. Prokofev V.N. (1948). Kolovratnyie rotornyie nasosyi: [Entsiklopedicheskiy spravochnik mashinostroitelya] Mashgiz, t. 12. P. 398 — 401. [in Russian].
2. Ryibkin E.A., Usov A.A. (1960). Shesterennyie nasosyi dlya metallorezhuschih stankov. G.: Mashgiz. 189 p. [in Russian].
3. Leonov A.E. (1960). Nasosyi gidravlicheskih sistem i mashin . Leonov A.E. M.-K.: Mashgiz,– 226 p. [in Russian].
4. Kudryavtsev P.R. (1963). Povyishenie tochnosti opredeleniya teoreticheskoy proizvoditelnosti shesterennyih nasosov . Kudryavtsev P.R. .. Trudyi GOSNITI. t.2. –S. 51 – 68. [in Russian].
5. Kulagin L.V., Demidov Yu.S., Prokofev V.N., Kondakov A.A. (Prokofev V.N. Ed.). (1968). Osnovyi teorii i konstruirovaniya ob'emnyih gidroperedach. M.: Vyisshaya shkola. 399 s. [in Russian].
6. Kudryavtsev P.R. (1970). Povyishenie resursa shesterennyih nasosov. Tehnika v selskom hozyaystve. 3 S. 67–72. [in Russian].
7. Osipov A.F. (1971). Ob'emnyie gidravlicheskie mashinyi kolovratnogo tipa. Teoriya, konstruktsiya, proektirovanie. M.: Mashinostroenie,. 207 s. [in Russian].
8. Bashta T.M. , Rudnev S.S., Nekrasov B.B et al. (1982). Gidravlika, gidravlicheskie mashinyi i gidravlicheskie privodyi. M.: Mashinostroenie. 593 s. [in Russian].
9. Bashta T.M. (1967). Gidravlicheskie privodyi letatelnyih apparatov. 4-e izd. M.: Mashinostroenie, 495 s. [in Russian].
10. Bashta T.M. (1974). Ob'emnyie nasosyi i gidravlicheskie dvigateli gidrosistem: [uchebnik dlya vuzov]. M.:Mashinostroenie, 606 s. [in Russian].
11. Bashta T.M. (1977). Mashinostroitelnaya gidravlika: [spravochnoe posobie]. M.: Mashinostroenie. 672 s. [in Russian].
12. Bashta T.M. (1969). Ob'emnyie gidravlicheskie privodyi. M.: Mashinostroenie. 628 s. [in Russian].
13. Lure Z.Ya., Kovalenko I.V. (2003). Matematicheskaya model kachayuschego uzla shesterennogo nasosa, kak ob'ekta mnogokriterialnoy optimizatsii. Vibratsii v tehnike i tehnologiyah. 3 (29). S.9-13. [in Russian].
14. Chernovol M.I., KulEshkov Yu.V. (2008). Osnovni napryami vdoskonalennya shesterennih nasosiv silskogospodarskoyi tehniki. VIsnik agrarnoyi nauki, 8. s. 52 — 54. [in Ukrainian].
15. Kuleshkov Yu.V., Osin R.A., Rudenko T.V., Matvienko A.A. (2008). Usovershenstvovanie matematicheskoy modeli mgnovennoy podachi shesterennogo nasosa. ZbIrnik naukovih prats KIrovogradskogo natsIonalnogo tehnIchnogo unIversitetu «TehnIka v sIlskogospodarskomu virobnitstvI, galuzeve mashinobuduvannya, avtomatizatsIya». KIrovograd, KNTU. 20. S. 253–262. [in Russian].
16. Kuleshkov Yu.V., Chernovol M.I., Rudenko T.V. Gutsul V.I., OsIn R.A. (2010). DoslIdzhennya povedInki matematichnoYi modelI pitomogo robochogo ob’Emu shesterennogo nasosa tipu NSh vId parametrIv zubchastogo zacheplennya. ZbIrnik naukovih prats KIrovogradskogo natsIonalnogo tehnIchnogo unIversitetu. TehnIka v sIlskogospodarskomu virobnitstvI, galuzeve mashinobuduvannya, avtomatizatsIya Vipusk 23 KIrovograd, s. 278 – 390. [in Ukrainian].
17. Kuleshkov Yu.V., Rudenko T.V. Osin R.A. (2009). Povyishenie udelnoy podachi shesterennogo nasosa. MOTROL Motorization and Power Industry in Agriculture. Volume 11A. Simferopol – Lublin S.193. 206.
18. Chernovol M.I., KulEshkov Yu.V. (2011). OptimIzatsIya zubchastogo zacheplennya shesterennogo nasosa tipu NSh u napryami pidvischennya yogo pitomogo ob’Emu. VIsnik agrarnoYi nauki, traven. 5. s. 42 – 45. [in Ukrainian].
19. Shesterennyie nasosyi s asimmetrichnoy liniey zatsepleniya shesteren . [Kuleshkov Yu.A., Chernovol M.I., Bez O.V., Titov Yu.A.] ..Teoriya, konstruktsiya i raschet. Kirovograd: «KOD», 2009 – 243 s. [in Ukrainian].
20. Kuleshkov Yu.V. (2004). Otsenka metodov opredeleniya ob'emnoy podachi shesterennyih nasos NSh. . Kuleshkov Yu.V. .. Zagalnoderzhavniy mIzhvIdomchiy naukovo-tehnIchniy zbIrnik «Konstruyuvannya, virobnitstvo ta ekspluatatsIya sIlskogospodarskih mashin». KIrovograd, KDTU. 34. S. 178–186. [in Russian].
21. KulEshkov Yu.V., Chernovol M.I., Magopets S.O., OsIn R.A., Rudenko T.V., Bevz O.V SposIb pIdvischennya pitomogo robochogo ob’Emu shesterennih gIdromashin Patent na korisnu model (UkraYina). 29840 vId 25.01.2008 r. V23R [in Ukrainian].
22. KulEshkov Yu.V., Rudenko T.V., OsIn R.A., KropIvna A. V., KulEshkova K.Yu. (2009). Sposib pidvischennya pitomogo robochogo ob’Emu shesterennih gIdromashin. Patent na korisnu model (Ukrayina). 40093. 25.03.2009. Byul. 6 [in Ukrainian].
23. Yudin E.M. (1964). Shesterennyie nasosyi. Osnovnyie parametryi i ih raschet. Yudin E.M. [2-e izd. pererab. i dop.]. M.: Mashinostroenie, 236 s. [in Russian].
24. Chinyaev I.A. (1969). Rotornyie nasosyi: [spravochnoe posobie]. L.: Mashinostroenie. 216 p. [in Russian].